Yuhong Holding Group Co.,LTD
|
Product Details:
Payment & Shipping Terms:
|
| Spec: | ASTM A213/A213M-2013 , ASME SA213/SA213M-2013 , A789 , SA789 | Material: | TP304/304L , TP316L , TP310S, TP316Ti, TP321/321H , TP347 , TP317 |
|---|---|---|---|
| Type: | Straight Tube , U Bend Tube, Coil Tube | Surface: | Bright Annealed, Pickled And Annealed , Polished |
| Package: | PLY-WOODEN CASE | ||
| High Light: | seamless stainless steel tube,seamless boiler tubes |
||
ASTM A213 / ASTM A269 Stainless Steel Seamless Tube Minimum Wall Thickness Evaporator Condensar
NOS ENCANTARíA APOYARLES EN LENGUA ESPAÑOLA Y INGLESA SI TIENE CUALQUIER REQUERIMIENTO RELATIVO!
Specification:
ASME SA213/A213: Standard Specification for Seamless Ferritic and Austenitic Alloy-
Steel Boiler, Superheater and Stainless Steel Heat Exchanger Tubes.
ASTM A249 / A249M:Standard Specification for Welded Austenitic Steel Boiler, Superheater
Heat-Exchanger, and Condenser Tubes.
ASTM A789/A789M, ASME SA789/SA789M Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
Other Standard:DIN 17456 , DIN 17458, EN10216-5, JIS-G3463,...
Material Grade:
Size Range:
| Production | Outside Diameter | Wall Thickness |
| Heat Exchanger Tube | 6.00mm to 101.6mm | 0.5mm to 8mm |
Final Finishing
Solution Annealed & Pickled/Bright Annealed.
Type of Tubes:
U-bend & Straight.
Some of the quality tests carried out by us includes:
| Corrosion Test | Conducted only when specially requested by the client |
| Chemical Analysis | Test done as per required quality standards |
| Destructive / Mechanical Testing | Tensile | Hardness | Flattening | Flare | Flange |
| Reverse-bend and Re. flat tests | Carried out in full compliance with relevant standards & ASTM A-450 and A-530 norms, which ensures trouble-free expansion, welding & use at customers end |
| Eddy Current Testing | Done to detect homogeneities in subsurface by using Digital Flaw-mark Testing System |
| Hydrostatic Testing | 100% Hydrostatic Testing carried out according to ASTM-A 450 norms for checking tube leakage, and biggest pressure we can support 20Mpa/7s . |
| Air Under Pressure Test | To check any evidence of air leakage |
| Visual Inspection | After passivation, every single length of tubes & pipes is subjected to thorough visual inspection by trained staff for detecting surface flaws & other imperfections |
Supplementary Testing : Apart from the above mentioned tests, we also carry out on the manufactured products supplementary testing. The tests conducted under this include:
|
|
|
Contact Person: Naty Shen
Tel: 008613738423992
Fax: 0086-574-88017980
