Yuhong Group Co.,Ltd
Zhejiang Yuhongwell Steel Co.,Ltd
Zhejiang Zhongwu Tube Manufacturing Co.,Ltd
|Place of Origin:||CHINA|
|Certification:||ABS, GL, DNV, NK, PED, AD2000, GOST9941-81, CCS, ISO 9001-2008|
|Model Number:||ASME SB167 UNS NO6600. UNS6600H|
|Minimum Order Quantity:||100KGS|
|Packaging Details:||PLYWOOD CASE,BUNDLE,PALLET|
|Payment Terms:||T/T, L/C|
|STANDARD:||B167, B163, B516, B517||GRADE:||Inconel600, NO6600, 2.4816|
|SIZE:||OD:3MM TO 530MM ,WT:0.2MM TO 60MM, L:MAX 50M||SURFACE:||BRIGHT|
|PACKAGE:||Ply-wooden Case Or Iron Case||NDT:||ET,UT,HT|
Nickel Alloy 600 Round Bar, ASTM B166 UNS N06600 Inconel 600 ,65*500MM
Alloy 600 is a nonmagnetic, nickel-based high temperature alloy possessing an excellent combination of high strength, hot and cold workability, and resistance to ordinary form of corrosion.
This alloy also displays good heat resistance and freedom from aging or stress corrosion throughout the annealed to heavily cold worked condition range.
The high chromium content of alloy 600 raises its oxidation resistance considerably above that of pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions.
This alloy exhibits high levels of resistance to stress and salt water, exhaust gases, and most organic acids and compounds.
Alloy 600 is not an age hardening alloy; cold working is the only available means of hardening. Softening by annealing begins at about 1600°F (871°C), and is reasonably complete after 10 to 15 minutes of heating at 1800°F (982°C). Above this temperature, grain growth may be objectionable, although very brief heating at 1900°F will cause complete softening without undue grain growth. Since the rate of cooling has no effect on the softening, the material may be water quenched or air cooled.
Low sulfur reducing furnace atmospheres should be used in forging. Major hot working should be done between 2300/1850°F, while light working may be continued as low as 1600°F. No hot working should be attempted between 1600/1200°F due to lower ductility in that range.
Alloy 600 is machinable in both the hot worked and annealed conditions. Because considerable heat is generated in machining this alloy, high-speed steel, cast nonferrous or cemented carbide tools should be used. The tools should be kept sharp.
Lathe turning speeds with high-speed and nonferrous tools are 35/45 sfm (0.18/0.23 m/s); speeds with cemented carbide tools are 100/175 sfm (0.51/0.89 m/s). (This data should be used as a guide for initial machine setup only. The figures used are averages. On certain work, the nature of the part may require adjustment of speeds and feeds.)
Sulfur-based oil should be used as a lubricant, but should be completely removed before the machined part is exposed to elevated temperatures, as in welding.
For higher properties, alloy 600 can be cold worked below 1200°F (649°C).
Alloy 600 can be joined by the usual welding , brazing, and soldering process.
Typical Mechanical Properties
Various forms and conditions
|Rod and Bar|
Average Room Temperature Tensile Data
|Form||Condition||Ultimate Tensile Strength,|
|Yield Strength at 0.2% offset,|
|Elongation in 2 in. (50.8mm)|
or 4D, percent
Sheet, Plate, Strip, Bar
* - minimum
|ASME SB-168 AMS 5540||ASME SB-166 AMS 5665||ASME SB-167 ASME SB-829 ASME SB-517 ASME SB-775||ASME SB-163 ASME SB-516 ASME SB751 AMS 5580||ASME SB-366||ASME SB-564 AMS 5665|
Some typical applications are: