Yuhong Holding Group Co.,LTD
 |
| Place of Origin: | CHINA |
| Brand Name: | YuHong |
| Certification: | ABS, GL, DNV, NK, PED, AD2000, GOST9941-81, CCS, ISO 9001-2008 |
| Model Number: | Inconel 600,601,625,690, 718 |
| Minimum Order Quantity: | 100KGS |
|---|---|
| Price: | Negotiable |
| Packaging Details: | Ply-wooden Case /Iron Case/ Bundle with plastic Cap |
| Delivery Time: | 15days-> |
| Payment Terms: | L/C, T/T |
| Supply Ability: | 600 TONS PER MONTH |
| Material Grade: | Incoloy 800(1.4876), Incoloy 800H(1.4958), 800HT(1.4959), 825(2.4858). Inconel 600(2.4816), 601(2.4851), 625(2.4856),690(2.4642), 718(2.4668). Monel 400(2.4360/2.4361) | NDT: | EDDY CURRENT TEST, HYDROSTATIC TEST |
|---|---|---|---|
| Standard: | B165,B424,B407,B167, B444 | ||
| High Light: | Monel 400 Seamless Alloy Tube,Inconel 600 Seamless Alloy Tube,Inconel 601 Seamless Alloy Pipe |
||
heat exchanger / boiler tube Inconel 600,601,625,690, 718. Monel 400, Seamless Corrosion Resistant Alloy tube,
| C | MN | P | S | Si | Cr | Ni | Mo | Cu | Co | Cb Ta | Ti | Al | Fe | Nb | Other |
| 0.1 | .50 max | .015 max | .015 max | .50 max | 20.0 -23.0 | 58.0 min | 8.0 -10.0 | 1.0 max | 0.40 max | 0.40 max | 5.0 max | 3.15 -4.15 |
Specifications
| International Specifications | Sheet/Plate | Round Bar | Pipe | Tube | Fittings | Forgings |
| BS 3072, BS 3074, BS 3076, NA 21 DIN 17744, DIN 17750, DIN 17751, DIN 17752, DIN 17754. Werkstoff Nr. 2.4856 AFNOR NC 22 D Nb | ASME SB-443 AMS 5599 AMS 5869 | ASME SB-446 AMS 5666 AMS 5837 | ASME SB-444 ASME SB-829 ASME SB-775 ASME SB-705 | ASME SB-444 ASME SB-829 ASME SB-751 ASME SB-704 AMS 5581 | ASME SB- 366 | ASME SB- 564 AMS 5666 |
Inconel 625 Alloy is frequently used for:
Alloy 600 UNS N06600 Inconel 600® Tubing Nonmagnetic High Temperature
Alloy 600 is a nonmagnetic, nickel-based high temperature alloy possessing an excellent combination of high strength, hot and cold workability, and resistance to ordinary form of corrosion.
This alloy also displays good heat resistance and freedom from aging or stress corrosion throughout the annealed to heavily cold worked condition range.
The high chromium content of alloy 600 raises its oxidation resistance considerably above that of pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions.
This alloy exhibits high levels of resistance to stress and salt water, exhaust gases, and most organic acids and compounds.
Alloy 600 is not an age hardening alloy; cold working is the only available means of hardening. Softening by annealing begins at about 1600°F (871°C), and is reasonably complete after 10 to 15 minutes of heating at 1800°F (982°C). Above this temperature, grain growth may be objectionable, although very brief heating at 1900°F will cause complete softening without undue grain growth. Since the rate of cooling has no effect on the softening, the material may be water quenched or air cooled.
Hot Working/Forging
Low sulfur reducing furnace atmospheres should be used in forging. Major hot working should be done between 2300/1850°F, while light working may be continued as low as 1600°F. No hot working should be attempted between 1600/1200°F due to lower ductility in that range.
Machinability
Alloy 600 is machinable in both the hot worked and annealed conditions. Because considerable heat is generated in machining this alloy, high-speed steel, cast nonferrous or cemented carbide tools should be used. The tools should be kept sharp.
Lathe turning speeds with high-speed and nonferrous tools are 35/45 sfm (0.18/0.23 m/s); speeds with cemented carbide tools are 100/175 sfm (0.51/0.89 m/s). (This data should be used as a guide for initial machine setup only. The figures used are averages. On certain work, the nature of the part may require adjustment of speeds and feeds.)
Sulfur-based oil should be used as a lubricant, but should be completely removed before the machined part is exposed to elevated temperatures, as in welding.
Cold Working
For higher properties, alloy 600 can be cold worked below 1200°F (649°C).
Welding
Alloy 600 can be joined by the usual welding , brazing, and soldering process.
Typical Mechanical Properties
Various forms and conditions
| Form and Condition |
Tensile Strength | 0.2% Yield Strength |
% Elongation in 2" |
% Reduction of Area |
Rockwell Hardness |
||
| Rod and Bar Cold-drawn Annealed As-drawn Hot rolled Annealed As-rolled Hot-finished Strip Annealed |
80-100 105-150 80-100 85-120 80-120 80-100 |
552-689 724-1034 552-689 586-827 586-827 552-689 |
25-50 80-125 30-50 35-90 35-90 30-45 |
172-345 552-862 207-345 241-621 241-621 207-310 |
55-35 30-10 55-35 50-30 50-30 55-35 |
70-60 60-30 70-60 65-50 65-50 ---- |
65-85B 90B-30C 65-85B 75-95B 75-95B 84B max. |
Average Room Temperature Tensile Data
| Form | Condition | Ultimate Tensile Strength, Ksi (MPa) |
Yield Strength at 0.2% offset, Ksi (MPa) |
Elongation in 2 in. (50.8mm) or 4D, percent |
| Sheet Plate Bar/Billet Sheet, Plate, Strip, Bar |
Annealed Annealed Annealed Annealed |
98 (676) 95 (655) 95 (655) 80 (550)* |
42 (290) 41 (283) 41 (283) 35 (240)* |
40 45 45 30* |
* - minimum
| Sheet/Plate | Round Bar | Pipe | Tube | Fittings | Forgings |
| ASME SB-168 AMS 5540 | ASME SB-166 AMS 5665 | ASME SB-167 ASME SB-829 ASME SB-517 ASME SB-775 | ASME SB-163 ASME SB-516 ASME SB751 AMS 5580 | ASME SB-366 | ASME SB-564 AMS 5665 |
Some typical applications are:
Contact Person: Ruby Sun
Tel: 0086-13095973896
Fax: 0086-574-88017980
