Yuhong Holding Group Co.,LTD
By the Yuhong Group technical team
In demanding industrial applications, standard stainless steel pipes, precision tubes, and flanges often face severe surface wear, including abrasive and adhesive wear under high pressure. While traditional nitriding provides high surface hardness, the nitrided layer is often thin (0.1~0.3mm for martensitic stainless steel) and may not withstand heavy surface pressure or prevent adhesion (galling). To solve this, Yuhong Group applies advanced composite surface treatments—combining nitriding, high-frequency induction hardening, and low-temperature sulfurizing. These processes significantly extend the service life of critical components like hydraulic pipes and mechanical seals. At Yuhong Group, we supply premium stainless steel pipes, precision tubes, and flanges engineered to integrate perfectly with these advanced treatments.
Workpieces that have been nitrided typically do not undergo further heat treatment. However, for components like high-pressure pipe fittings, the thin nitrided layer may fail under heavy surface pressure. By applying high-frequency induction hardening after nitriding, we achieve a dual benefit:
This composite treatment retains the original benefits of nitriding while drastically improving load-bearing capacity.
While nitriding improves resistance to abrasive and fatigue wear, it may not prevent adhesive wear (galling) in dynamic applications like sliding precision tubes or valve components. To reduce the friction coefficient, a secondary chemical film treatment is necessary.
Low-temperature sulfurizing creates a soft, uniform FeS (iron sulfide) film on the hard nitrided surface. This film acts as a solid lubricant during friction, significantly increasing the surface's resistance to adhesive wear without compromising the underlying hardness.
This combination achieves a similar functional goal to the nitriding + sulfurizing process. The coexistence of a hard, induction-hardened surface and a soft FeS lubricating film dramatically improves the component's tribological properties. This is especially beneficial for heavy-duty mechanical tubes and rotating shaft components where both high load capacity and low friction are required.
When specifying composite treatments for your pipe and flange manufacturing, two rules must be followed:
Achieving the best surface treatment results starts with reliable, high-quality base materials. At Yuhong Group, we supply premium stainless steel seamless pipes, precision tubes, and flanges with verified chemical compositions that respond perfectly to nitriding and induction hardening. We offer a flexible MOQ (1 Ton), competitive FOB pricing, and a reliable Lead Time (15-25 days). Contact our technical team today to discuss your specific wear-resistant material requirements and get a fast quotation.
Because the nitrided layer is often thin (0.1~0.3mm), it may not withstand high surface pressure. Post-nitriding induction hardening deepens the hardened layer to 1.2~1.5mm and diffuses nitrogen deeper, significantly improving load-bearing capacity.
Sulfurizing forms a soft, uniform FeS film on the surface. This acts as a solid lubricant, reducing the friction coefficient and preventing adhesive wear (galling) in dynamic applications.
You must select the correct treatment combination based on the wear mechanism and ensure the operational sequence is rationally arranged to prevent interference between processes and avoid distortion.
Yes. Yuhong supplies high-quality seamless pipes, precision tubes, and flanges with strict chemical composition and dimensional tolerances, ensuring optimal results when subjected to composite surface treatments.
![]()
![]()
Contact Person: Mr. Jikin Cai
Tel: +86-13819835483
Fax: 0086-574-88017980