Yuhong Holding Group Co.,LTD
Our production line has completed and shipped a new consignment of SA213 TP316L seamless U-tubes, manufactured to ASTM A213 / ASME SA213 specifications for heat exchanger and boiler applications. Every tube in this batch was cold drawn, solution annealed, precision U-bent and fully tested before packing, ready to support shell-and-tube heat exchangers, feedwater heaters and condenser projects worldwide.
U-bent tubes are the most demanding part of any tube bundle: the bend section must keep a uniform wall thickness, avoid ovality and wrinkling, and retain full corrosion resistance after forming. This shipment was produced with our standard U-bending procedure and post-bend heat treatment, so the mechanical properties in the bend area match those of the straight legs.
TP316L (UNS S31603) is the low-carbon, molybdenum-bearing austenitic stainless steel grade specified where both chloride pitting resistance and weldability matter. The 2–3% molybdenum addition improves resistance to pitting and crevice corrosion in cooling water and mildly aggressive process media, while the low carbon content (0.03% max) minimises carbide precipitation and preserves intergranular corrosion resistance in and around welded tube-to-tubesheet joints.
Each order is traceable from heat number to finished tube. The production route and inspection plan for this shipment covered:
| Item | Range / Specification |
|---|---|
| Grade | ASTM A213 / ASME SA213 TP316L (UNS S31603) |
| Standard | ASTM A213, ASME SA213, EN 10216-5, GB/T 13296 |
| Outside diameter | 12.7 mm – 50.8 mm (custom sizes available) |
| Wall thickness | 0.9 mm – 5.0 mm, or to customer schedule |
| Straight leg length | Up to 12 m per leg, according to drawing |
| U-bend radius | From 1.5 × OD, controlled ovality and wall thinning |
| Delivery condition | Solution annealed, pickled & passivated, ends capped |
| Testing | Eddy current, hydrostatic, flattening, flaring, hardness, PMI |
SA213 TP316L U-tubes are widely specified for shell-and-tube heat exchangers, feedwater heaters, surface condensers, steam generators, reboilers and other pressure equipment in the power generation, petrochemical, chemical processing, desalination and marine industries. Because the tube bundle can be withdrawn as a single unit, the U-tube configuration keeps maintenance fast and reduces downtime during retubing.
Tubes are protected with plastic end caps, bundled and fixed in seaworthy plywood cases with moisture barrier and desiccant. Shipping marks, heat numbers and certificates are matched to each case, so receiving inspection at the project site is straightforward. Standard production lead time is 25–35 days depending on size and quantity, with express schedules available for urgent retubing projects.
We manufacture stainless steel, duplex and nickel alloy heat exchanger tubes in seamless and welded constructions, with in-house U-bending, heat treatment and NDT. From material selection and bend-radius optimisation to documentation and export packing, our engineering team supports EPC contractors, heat exchanger fabricators and plant maintenance teams from inquiry to after-sales service.
For drawings, available sizes and a quotation on your next SA213 TP316L U-tube requirement, please send your specification sheet and we will respond within one working day.
![]()
![]()
Contact Person: Mr. Jikin Cai
Tel: +86-13819835483
Fax: 0086-574-88017980