Yuhong Holding Group Co.,LTD
Place of Origin: | CHINA |
Brand Name: | YUHONG GROUP |
Certification: | API, PED,DNV, ABS, LR, BV |
Model Number: | ASTM A234/ASME SA234 WPB-S |
Minimum Order Quantity: | 1PC |
---|---|
Price: | Negotiable |
Packaging Details: | PLY-WOODEN CASE OR PALLET |
Delivery Time: | Depends on quantity |
Payment Terms: | T/T, L/C AT SIGHT |
Supply Ability: | 100 TONS PER MONTH |
Standard: | ASTM A234/ASME SA234 | Material Grade: | WPB/WP11/WP22/WP5/WP9/WP91/WP6/WPHY 52/WPHY 60/WPHY 65 |
---|---|---|---|
Type: | 45/90 DEG. ELBOW | Size: | DN8 TO DN100 |
Packing: | Pallet / Ply-Wooden Case | NDT: | RT, MT |
High Light: | 45 degree carbon steel pipe elbow,astm a234 carbon steel pipe elbow,b16.9 carbon steel 90 degree elbow |
Abstract
ASTM A234 WPB Elbow is one of the most used forms of pipe fittings. An elbow is a connector shaped like an elbow and allows for directional transformation in fluid flow. A234 WPB Elbow is produced and supplied in the butt welded form. SA234 WPB Elbow usually comes in either of three angles; 22.5, 45 or 90 degrees. A234 WPB SCH 80 Elbow is a standardization that conforms to schedule 80. ASTM A234 WPB Elbow could also be threaded or machined; sometimes it is also socketed.
SA234 WPB Elbow is made up of carbon steel or alloy steel. Depending on the needs of the application, the A234 Wpb Elbow Dimensions vary. They can be applied to all nominal sizes of pipes. A234 Wpb Elbow Weight is mostly dependent on the material, diameter and length of the fitting. Elbow 90 A234 WPB indicates the degree of directional change by 90 degrees.
ASTM A234 Scope:
Chemical Composition of ASTM A234:
Grade | C | Mn | P | S | Si | Cr | Mo | Ni | Cu | V | Nb |
WPB | 0.3 | 0.29-1.06 | 0.05 | 0.058 | 0.1min | 0.4 | 0.15 | 0.4 | 0.4 | 0.08 | 0.02 |
WPC | 0.35 | 0.29-1.06 | 0.05 | 0.058 | 0.1min | 0.4 | 0.15 | 0.4 | 0.4 | 0.08 | 0.02 |
WP11 CL1 | 0.05-0.15 | 0.30-0.60 | 0.03 | 0.03 | 0.50-1.00 | 1.00-1.50 | 0.44-0.65 | - | - | - | - |
WP11 CL2/3 | 0.05-0.20 | 0.30-0.80 | 0.04 | 0.04 | 0.50-1.00 | 1.00-1.50 | 0.44-0.65 | - | - | - | - |
Mechanical properties of ASTM A234:
Tensile Requirements | WPB | WPC, WP11CL2 | WP11CL1 | WP11CL3 |
Tensile Strength, min, ksi[MPa] | 60-85 | 70-95 | 60-85 | 75-100 |
(0.2% offset or 0.5% extension-under-load) | [415-585] | [485-655] | [415-585] | [520-690] |
Yield Strength, min, ksi[MPa] | 32 | 40 | 30 | 45 |
[240] | [275] | [205] | [310] |
Contact Person: Kelly Huang
Tel: 0086-18258796396
Fax: 0086-574-88017980