ASTM B163 INCONEL® 600 TUBES / ASME SB163 INCONEL TUBES (UNS N06600)
ASTM B163 INCONEL 600 TUBES, ASTM B163 ALLOY 600 TUBES, ASME SB163 INCONEL 600 SEAMLESS TUBES, ASTM B163 UNS NO6600, ASTM B163 INCONEL 600 TUBING.
Nickel Alloy Seamless Pipe /Tube , ASME SB167 Inconel 600 / Alloy 600 / UNS NO6600, 65*5.5*442mm SMLS TUBE,Heat Exchanger.
ASTM B163 Inconel UNS NO6600 Tubes Certified and Tested in accordance with NACE MRO175, Hardness Test, Flare, Hydrostatic Test, Eddy Current test, Grain Size Test, Eddy Current, Annealed, Tempered, Stress Relieved etc.
YUHONG GROUP, we carry a full inventory of ASTM B163 Inconel 600 Seamless Tube and Supply ASTM B163 Alloy 600 Seamless Tube products is a a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments . This nickel alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process application in an as welded condition.
Inconel 600 is a nickel-chromium alloy used for applications that require corrosion and high temperature resistance. This nickel alloy was designed for service temperatures from cryogenic to elevated temperatures in the range of 2000° F. It is non-magnetic, has excellent Mechanical Properties , and presents the desirable combination of high strength and good weldability under a wide range of temperatures. The high nickel content in Inconel 600 enables it to retain considerable resistance under reducing conditions, making it resistant to corrosion by a number of organic and inorganic compounds, gives it excellent resistance to chloride-ion stress-corrosion cracking and also provides excellent resistance to alkaline solutions. Typical applications of this nickel alloy include the chemical, pulp and paper, aerospace, nuclear engineering and heat treating industries.
Typical corrosion applications include titanium dioxide production (chloride route), perchlorethylene syntheses, vinyl chloride monomer (VCM), and magnesium chloride. Alloy 600 is used in chemical and food processing, heat treating, phenol condensers, soap manufacture, vegetable and fatty acid vessels and many more.
Resistant to a wide range of corrosive media. The chromium content gives better resistance than Alloy 200 and 201 under oxidizing conditions, at the same time the high nickel gives good resistance to reducing conditions.
Virtually immune to chlorine ion stress corrosion cracking.
Demonstrates adequate resistance to organic acids such as acetic, formic and stearic.
Excellent resistance to high purity water used in primary and secondary circuits of pressurized nuclear reactors.
Little or no attack occurs at room and elevated temperatures in dry gases, such as chlorine or hydrogen chloride. At temperatures up to 550C in these media, this alloy has been shown to be one of the most resistant of the common alloys.
At elevated temperatures the annealed and solution annealed alloy shows good resistance to scaling and has high strength.
The alloy also resists ammonia bearing atmospheres, as well as nitrogen and carburizing gases.
Under alternating oxidizing and reducing conditions the alloy may suffer from selective oxidation.
ASTM B163 Inconel 600 Seamless Tubes range
| ASTM B163 Inconel Tubes Specification |
ASTM B163 / ASTM B167 / ASTM B444 / ASTM B829 / ASME SB163 / ASME SB167 / ASME SB444 / ASME SB829 |
| ASTM B163 Inconel Tubes Grades |
INCONEL 600 / Inconel 601 / Inconel 625 / UNS NO6600 / UNS NO6601 / UNS NO 6625 |
| ASTM B163 Inconel Tubes Type |
Cold Drawn / Welded / ERW |
| ASTM B163 Inconel Tubes Outer Diameter Size |
Seamless - 1/4" NB to 6" NB (Nominal Bore Size)
Welded / ERW- 1" NB to 16" NB (Nominal Bore Size) |
| ASTM B163 Inconel Tubes Wall Thickness |
Schedule 10 to Schedule 160 |
| ASTM B163 Inconel Tubes Length |
5 to 7 Meters, 09 to 13 Meters, Single Random Length, Double Random Length And Customize Size. |
| ASTM B163 Inconel Tubes Ends |
Plain Ends / Beveled Ends |
| ASTM B163 Inconel Tubes Delivery Conditions |
As Rolled, Cold Drawn, Hot Finish, Stress Relieved, Annealed, Hardened, Tempered |
| ASTM B163 Inconel Tubes Coating |
Electropolish, Mechanical Polish, Satin Finish, Passivated |
| ASTM B163 Inconel Tubes Other Testing |
NACE MRO175, Hardness Test, Flare, Hydrostatic Test, Eddy Current test, Grain Size Test, Eddy Current, Annealed, Tempered, Stress Relieved etc. |
| ASTM B163 Inconel Tubes Dimension |
All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM And ASME |
| ASTM B163 Inconel Tubes Value Added Services |
Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment |
| ASTM B163 Inconel Tubes Packaging |
Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector |
| ASTM B163 Inconel Tubes Shipment & Transportation |
By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes |
| ASTM B163 Inconel Tubes Material Test Certificate |
Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC |
ASTM B163 Inconel 600 / ASME SB163 Inconel 600 Seamless Tubes
Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
This specification covers Seamless Tubes of nickel and nickel alloys, as shown in Table 1, for use in condenser and heat-exchanger service.
(A) Maximum unless range or minimum is given. Where ellipses (...) appear in this table, there is no requirement and analysis for the element need not be determined or reported.
(B) Element shall be determined arithmetically by difference.
(A) Maximum unless range or minimum is given. Where ellipses (...) appear in this table, there is no requirement and analysis for the element need not be determined or reported.
(B) Element shall be determined arithmetically by difference.
(C) Alloy UNS N08811: Al + Ti, 0.85 − 1.20.
This specification covers outside diameter and average wall, or outside diameter and minimum wall tube.
The sizes covered by this specification are 3 in. (76.2 mm) and under in outside diameter with minimum wall thicknesses of 0.148 in. (3.76 mm) and under, and with average wall thicknesses of 0.165 in. (4.19 mm) and under.
Tube shall be furnished in the alloys and conditions as shown in Table 2. for small diameter and light wall tube (converter sizes), see Appendix X2.
(A) Alloy UNS N08800 is normally employed in service temperatures up to and including 1100°F (593°C). Alloys UNS N08810, UNS N08811, and UNS N08120 are normally employed in service temperatures above 1100°F (539°C) where resistance to creep and rupture is required, and it is annealed to develop controlled grain size for optimum properties in this temperature range.
The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
Keywords
Condenser Tubes - Condensers - Heat Exchanger Tubes - Heat Exchangers - Nickel - Nickel Alloys - Seamless Nickel Alloy Tubes - Seamless Pipes and Tubes.
ASTM B163 Inconel 600 Seamless Tubes Chemical Composition, UNS NO6600
The chemical composition of Inconel Alloy 600 is provided in the table below:
| Ni + Co |
Cr |
Fe |
C |
Mn |
S |
Si |
Cu |
| 72.0 min |
14.0-17.0 |
6.0-10.0 |
.15 max |
1.00 max |
.015 max |
.50 max |
.50 max |
ASTM B163 Inconel 600 Seamless Tubes Mechanical Properties
Typical room temperature Tensile Properties of Annealed Material
| Product Form |
Condition |
Tensile (ksi) |
.2% Yield (ksi) |
Elongation (%) |
Hardness (HRB) |
| Tube & Pipe |
ot-Finished |
75-100 |
25-50 |
35*55 |
- |
| Tube & Pipe |
Cold-Drawn |
80-100 |
25-50 |
35-55 |
88 Max |
ASTM B163 Inconel 600 Seamless Tubes Applications
The Inconel Alloy 600 / 601 / 625 Pipes and Tubes is used in the following applications:-
Aircraft ducting systems
Aerospace
Jet engine exhaust systems
Engine thrust-reverser systems
Specialized seawater equipment
Chemical process equipment
Chemical Processing
Heat treating industry
Power generation
Heat treating muffles and retorts
Radiant tubes
Catalyst support grids in nitric acid production
Steam superheater tube supports
Pulp and paper industry
food processing
Nuclear Engineering
Gas turbine components
Your message must be between 20-3,000 characters!
