logo
Yuhong Holding Group Co.,LTD
About Us
Factory Tour
Quality Control
Contact Us
Home ProductsSteel Fitting

ASTM A182 F53 Super Duplex Steel 2507 Weldolet MSS SP-97 Butt Weld Branch Outlet Fitting

ASTM A182 F53 Super Duplex Steel 2507 Weldolet MSS SP-97 Butt Weld Branch Outlet Fitting

  • ASTM A182 F53 Super Duplex Steel 2507 Weldolet MSS SP-97 Butt Weld Branch Outlet Fitting
  • ASTM A182 F53 Super Duplex Steel 2507 Weldolet MSS SP-97 Butt Weld Branch Outlet Fitting
  • ASTM A182 F53 Super Duplex Steel 2507 Weldolet MSS SP-97 Butt Weld Branch Outlet Fitting
ASTM A182 F53 Super Duplex Steel 2507 Weldolet MSS SP-97 Butt Weld Branch Outlet Fitting
Product Details:
Place of Origin: CHINA
Brand Name: YUHONG
Certification: ABS, GL, DNV, NK, PED, AD2000, GOST9941-81, CCS, ISO 9001-2008
Model Number: ASMT A182 F53 Super Duplex Weldolet
Payment & Shipping Terms:
Minimum Order Quantity: 1pc if stock available
Packaging Details: PLYWOOD CASE, PALLET
Delivery Time: 7days
Payment Terms: L/C,T/T
Contact Now
Detailed Product Description
Product Name: Weldolet Standard: ASTM A182, ASME SA182
Material: Super Duplex Steel 2507 / S32750 / 1.4410 / F53 Dimension: MSS SP-97
OD: 1/4"-48" Thickness: SCH.10S- SCH.XXS
End: Butt Weld
High Light: ASTM A182 F53 Super Duplex Weldolet, High Pressure MSS SP-97 Branch Outlet

ASTM A182 F53 / UNS S32750 Nipolet , Super Duplex Steel 2507 High Pressure MSS SP-97 Brach Outlet



This is an integrally reinforced, hot-forged branch outlet fitting made from ASTM A182 F53 super duplex stainless steel (UNS S32750, EN 1.4410, market grade 2507) and manufactured to MSS SP-97 with a butt-weld outlet. It is used to take a 90° branch off a main pipe run in high-pressure, corrosive service — seawater cooling headers, chloride-bearing process lines, wet gas and utility manifolds — without cutting in a fabricated tee or welding on a separate reinforcing pad.

The problem it solves is the weld count. A fabricated branch needs a tee plus a nipple plus a pad, which means three girth welds, three heat-affected zones and three chances of a root defect in the exact spot where the pipe is most highly stressed. A forged outlet is a single body with the reinforcement built into the forging itself, so the branch connection is one weld instead of three, and the wall transition from run pipe to outlet is continuous.

What sets this item apart from commodity outlets is grade discipline and traceability rather than appearance: the 24.0–26.0% Cr, 3.0–5.0% Mo and 0.24–0.32% N balance gives a pitting resistance equivalent number (PREN) above 40 together with roughly twice the yield strength of 316L, and every piece is supplied with a heat-number-linked mill test certificate so the material can be verified by PMI on receipt. For projects mixing grade families, see the grade comparison table below.



Chemical Composition of A182 F53 Super Duplex Pipe Fittings

UNS C % Cr % Ni % Mo % N % Mn % Cu % W S Si
S32750 < 0.03 24.0-26.0 6.0-8.0 3.0-5.0 0.24-0.32 < 1.20 < 0.5 - - -
2507 < 0.03 24.0-26.0 6.0-8.0 3.0-5.0 0.24-0.32 < 1.20 < 0.5 - - -
F53 < 0.03 24.0-26.0 6.0-8.0 3.0-5.0 0.24-0.32 < 1.20 < 0.5 - - -



Mechanical Propertities of A182 F53 Super Duplex Pipe Olet

Grade YS (MPa) TS (MPa) % Elongation Hardness(BHN)
UNS S32750 550 min. 795 min. 15 min. 310 max.
2507 550 min. 795 min. 15 min. 310 max.
F53 550 min. 795 min. 15 min. 310 max.



Material grade cross reference

ASTM / ASME UNS EN / DIN Common trade name PREN (typical)
A182 F53 S32750 1.4410 / X2CrNiMoN25-7-4 Super Duplex 2507 > 40
A182 F55 S32760 1.4501 Super Duplex 2507 Cu/W (Zeron 100 type) > 40
A182 F51 S31803 1.4462 Duplex 2205 ~ 34
A182 F44 S31254 1.4547 Super Austenitic 254 SMO > 42

Rule of thumb used on most seawater and chloride projects: 2205 (F51) up to moderate chloride and ambient temperature, 2507 (F53) where chlorides and temperature rise together or where higher strength allows a thinner wall, and 6Mo / 254 SMO where the environment is acidic oxidising rather than chloride-driven.



Frequently Asked Questions
What is the difference between this weldolet and a nipolet?
A weldolet is a branch outlet with a butt-weld end, so the branch pipe is welded directly to it. A nipolet builds a short nipple and flange into the same forging, which suits small instrument and vent connections where you want to avoid an extra weld. Both follow MSS SP-97 reinforcement geometry.

Can the outlet be supplied for sour service?
Yes. Specify NACE MR0175 / ISO 15156 at inquiry stage, and the material will be supplied with hardness control at 310 HBW max or lower and the corresponding test documentation.

How do I confirm the correct outlet size?
Tell us the run pipe NPS and schedule, the branch NPS and schedule, the end type and the design code. We return a dimensioned sketch for approval before forging — this takes one working day and prevents mismatch on site.


Request a Quotation
Send us the four data points below through the inquiry form on this page and you will receive a priced offer, drawing and delivery schedule, normally within 12 working hours:

Run pipe NPS and schedule (for example 12" SCH.40)
Outlet NPS, schedule and end type (BW / SW / threaded)
Material grade — F53 (S32750) as standard, F51 or F55 on request
Quantity, destination port and required certificate package



Applications

  • Sectors: Oil and gas, chemical processing, power generation, and nuclear facilities.
  • Global Alignment: Works with ASME BPVC, ASTM, and API standards to ensure U.S. and international compliance.
  • Case Example: Hastelloy C276 Weldolets® for corrosive environments in chemical plants.




Contact Details
Yuhong Group Co.,Ltd

Contact Person: Vivi

Tel: 0086-13023766106

Fax: 0086-574-88017980

Send your inquiry directly to us (0 / 3000)